Logged In: YES 
user_id=71407

Below is the output of hinv.
I have no clue how to find the regular expression without 
having a traceback. Is there some place in _sre.c where I 
could insert a print statement?


16 400 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Integral SCSI controller 12: Version Fibre Channel AIC-
1160, revision 2
  RAID controller: unit 0 on SCSI controller 12
  RAID lun: unit 0, lun 3 on SCSI controller 12
  RAID lun: unit 0, lun 4 on SCSI controller 12
  RAID lun: unit 0, lun 5 on SCSI controller 12
Integral SCSI controller 6: Version Fibre Channel AIC-
1160, revision 2
  RAID controller: unit 0 on SCSI controller 6
  RAID lun: unit 0, lun 0 on SCSI controller 6
  RAID lun: unit 0, lun 1 on SCSI controller 6
  RAID lun: unit 0, lun 2 on SCSI controller 6
Integral SCSI controller 14: Version Fibre Channel AIC-
1160, revision 2
Integral SCSI controller 2: Version QL1040B (rev. 2), 
single ended
Integral SCSI controller 3: Version QL1040B (rev. 2), 
differential
Integral SCSI controller 4: Version QL1040B (rev. 2), 
differential
Integral SCSI controller 5: Version QL1040B (rev. 2), 
differential
Integral SCSI controller 9: Version Fibre Channel QL2200
  RAID controller: unit 0 on SCSI controller 9
  RAID lun: unit 0, lun 7 on SCSI controller 9
Integral SCSI controller 1: Version QL1040B (rev. 2), 
single ended
  Tape drive: unit 5 on SCSI controller 1: DAT
Integral SCSI controller 0: Version QL1040B (rev. 2), 
single ended
  Disk drive: unit 1 on SCSI controller 0
  Disk drive: unit 2 on SCSI controller 0
  Disk drive: unit 3 on SCSI controller 0
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 10: Version QL1040B (rev. 2), 
single ended
  CDROM: unit 6 on SCSI controller 10
Integral SCSI controller 11: Version QL1040B (rev. 2), 
single ended
Integral SCSI controller 13: Version Fibre Channel AIC-
1160, revision 2
Integral SCSI controller 7: Version Fibre Channel AIC-
1160, revision 2
Integral SCSI controller 8: Version Fibre Channel QL2200
  RAID controller: unit 0 on SCSI controller 8
  RAID lun: unit 0, lun 0 on SCSI controller 8
  RAID lun: unit 0, lun 2 on SCSI controller 8
Integral SCSI controller 15: Version Fibre Channel AIC-
1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty4
Fast Ethernet: ef1, version 1, module 2, slot io1, pci 2
Integral Fast Ethernet: ef0, version 1, module 1, slot 
io1, pci 2
Gigabit Ethernet: eg0, module 2, XIO slot io3, firmware 
version 12.4.10
ATM PCA-200E OC-3: module 1, xio_slot 2, pci_slot 0, 
unit 0
Origin PCI XIO board, module 1 slot 2: Revision 4
Origin FIBRE CHANNEL board, module 2 slot 6: Revision 4
Origin FIBRE CHANNEL board, module 1 slot 7: Revision 4
Origin MSCSI board, module 1 slot 8: Revision 4
Origin FIBRE CHANNEL board, module 2 slot 10: Revision 
4
Origin BASEIO board, module 1 slot 1: Revision 4
Origin BASEIO board, module 2 slot 1: Revision 4
IOC3/IOC4 external interrupts: 2
IOC3/IOC4 external interrupts: 1