I have added AF_VSOCK support to python's 3.6 socket module ( socketmodule.c socketmodule.h cloned from https://hg.python.org/cpython ). The implementation is very similar to AF_NETLINK. AF_VSOCK requires the VMware-specific VMCI transport which is currently upstream or the virtio-vsock drivers developed by Stefan Hajnoczi at Red Hat. The virtio-vsock drivers are not upstream yet but more information with source and build instructions can be found at http://qemu-project.org/Features/VirtioVsock.

More information on vSocket programming can be found at https://pubs.vmware.com/vsphere-60/topic/com.vmware.ICbase/PDF/ws9_esx60_vmci_sockets.pdf

The VMCI transport supports SOCK_DGRAM and SOCK_STREAM on both Linux and Windows. Virtio-vsock currently supports SOCK_STREAM only on Linux.

My python addition supports SOCK_STREAM and SOCK_DGRAM calls on Linux only.

I have tested my implementation on both driver sets on Linux.

Attached is a diff file so you can see which files I've modified. These include a new configure.ac. I have already tested the new file generation by running autoreconf.

Also included in the patch is an updated socket.rst file however I could not get the final html page to be double spaced.

Looks like there's a missing versionadded directive in the doc patch.

Is it possible/sensible to add tests for the new feature?

(I haven't reviewed the patch in detail, hopefully someone with more experience with C socket programming than I have will do that.)

Sure I can add tests. I would like to base them on the existing socket tests. Where are those?

I did add a version

+ .. versionadded:: 3.4

It just not may not be the right one.

Ah, I see. No, the versionadded will be 3.6, and should go *after* the documentation of the new socket type.

The existing socket tests are in Lib/test/test_socket.py.

The patch can be applied, and build successfully. I have ran the current test suite[1]. The two failed tests do not seem to be have anything to do with this patch (read the end of the consoleText output). I think the thing remaining is the new test cases, and NEWS file update.

[1] https://ci.centos.org/job/cPython-build-patch/24/consoleText

Please forgive the long delay in providing this update. I got a little sidetracked. Attached is the patch for Python 3.7. It includes fixes suggested in rev 1 plus VSOCK tests in test_socket.py.

Thanks,

Cathy

Is there anything else that is needed for this patch?

Thanks!

The second patch seems to be missing the configure changes. Also, the tests have some over-long lines (we limit line lengths to 79 characters). I realize there are other long lines in that file, but no need to add more :)

There is trailing whitespace on a number of lines in your patch.

Since this is new, we may not want to accept it until the support hits upstream. Specifically, it will be difficult to get a review if the reviewer has to build a custom kernel to test the code :) You do say that the VMCI is upstream, but I don't know what that means. Which upstream?

Note: I'm not familiar with the socket C code, so I haven't reviewed the C code changes. The tests look fine to me.

For the docs, the proposal doesn't seem to follow the format of the existing docs. I would expect only the first paragraph located where you have it. The remaining constants should be in the 'module contents'/'constants' section, I think. Yes, that means each one gets a '.. versionadded' label. Presumably also an 'availablility' label with whatever the minimum kernel version is...another reason we may need to wait.

Oh, I see, the ac changes are there, I was looking at the patch delta instead of the complete patch.

Is there a format checker I could use on the patch?

VMCI and the vmw_vsock_vmci_transport kernel modules are located in the upstream linux tree at

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

They have been there for about years. These drivers are part of various downstream kernels such as RHEL. You will need a Vmware virtual machine in order to test it.

Only the virtio-vsock driver is a new vsock application that needs to be custom built.

Sorry about the typo the drivers have been there for about 4 years.

'make patchcheck' will do whitespace checking because that's hard to eyeball (although many editors/IDEs do support making it visible nowadays). We don't use any other checking tools other than eyeballs, since not all of the existing code conforms to PEP7/8 and for various reasons we aren't going to update most of the old code to conform.

So, if I'm running an ubuntu virtual machine under VMWare Fusion (which I already have set up) I should be able to get the tests to run? Or does it need to be RedHat (or presumably CentOS)?

First make sure the driver is in your kernel. It will be with RHEL. Look in /lib/modeles/"your kernel name"/kernel/net/vmw_vsock/vmw_vsock_vmci_transport. I have never tried it on vmware fusion. I have tested it on ESX. See if there is a VMCI option to enable on your VM's settings. Start the vm and do an lsmod to see if vmw_vsock_vmci_transport is loaded.

I've attached a little C program thats netcat for vsock. Its a quick confirmation that your transport is loaded correctly. It will show you your CID.

run ./nc-vsock

CID = 973033371
CID = 0x39ff4f9b
usage: ./nc-vsock [-l <port> [-t <dst> <dstport>] | <cid> <port>]

The vsock code is now in the linux upstream kernel and qemu. I will be resubmitting my vsock patches for python. So from what I can tell the tip of the devel tree is for 3.7 and that the source control has switched to git. My question is do I need a github account or can I push git patches directly to this issues page?

Thanks,

Cathy

You don't need a GitHub account for contributing to CPython, but the pull request workflow is the preferred way. You can still attach your patches to this issue.

I've attached the third version of VSOCK patch addressing the concerns of the last rev. I've also included a README file that lists instructions on how to setup a test environment.

Thanks

Help file.

I also issued a pull request

#2489

Let me know if I screwed it up.

Thanks,

Cathy

The build and test bots failed but I don't understand why. The build could not find module _socket but that is not new and other modules failed.

The test could not import fcntl which I did add but should not fail as I have run this test many time and other tests import fcntl.

#2489

I'm attempting to figure out whether or not we have a buildbot in the Buildbot fleet that will cover this test case.

Based on the pre-merge CI run, it seems Ubuntu 14.04 is too old to include the required kernel headers.

However, it looks like RHEL/CentOS are also currently still missing the userspace changes to fully enable AF_VSOCK support (as the Red Hat backport flow appears to have gone through the dedicated hypervisor variant first): https://bugzilla.redhat.com/show_bug.cgi?id=1315822

So it's looking to me like we're going to need either a recent Fedora, a non-LTS Ubuntu, or a Debian 9 system to be confident we have the right headers available.

Fedora 25 has the proper headers.

So I revised my code based on the reviews and I passed all the checks ... now what?

Thanks,

Cathy

I think we are waiting on confirmation that we have a buildbot that has the necessary headers.

OK thanks!

I updated my PGO buildbot to Debian 9 which should have them.

http://buildbot.python.org/all/builders/AMD64%20Debian%20PGO%203.x

~$ grep AF_VSOCK /usr/include///*
/usr/include/x86_64-linux-gnu/bits/socket.h:#define AF_VSOCK PF_VSOCK

You will also need linux/vm_sockets.h in order to build.

yep, linux/vm_sockets.h exists. I believe it's kernel headers are from 4.9.

That should do it.

Everything compiles successfully on this host - configure detects the header has HAVE_LINUX_VM_SOCKETS_H set to 1.

test_socket passes on this host. However since i'm not running with a /dev/vsock, the unittests (correctly) skip the new tests.

testCreateSocket (test.test_socket.BasicVSOCKTest) ... skipped 'VSOCK sockets required for this test.'
testCrucialConstants (test.test_socket.BasicVSOCKTest) ... skipped 'VSOCK sockets required for this test.'
testSocketBufferSize (test.test_socket.BasicVSOCKTest) ... skipped 'VSOCK sockets required for this test.'
testVSOCKConstants (test.test_socket.BasicVSOCKTest) ... skipped 'VSOCK sockets required for this test.'
testStream (test.test_socket.ThreadedVSOCKSocketStreamTest) ... skipped 'VSOCK sockets required for this test.'

Hi,

I believe I am waiting for a final review. Is there anything else I need to be doing at this point.

Thanks,

Cathy

There is an outstanding review on my pull request at #2489 as there is an red X at changes requested by kushaldas and I believe I have made the necessary changes.

Again please let me know if there is anything that I need to do as I am new to this process.

Thanks,

Cathy

New changeset effc12f by Christian Heimes (caavery) in branch 'master':
bpo-27584: New addition of vSockets to the python socket module (bpo-2489)
effc12f